CORDER Operating microscope installation method
CORDER Operating microscopes are widely used by surgeons to provide high quality visualization of the surgical site. The CORDER Operating microscope must be installed with care to ensure its proper functioning. In this article, we will give detailed guidance on the installation method of CORDER Operating microscope.
Paragraph 1: Unboxing
When you receive your Operating microscope, the first step is to carefully unpack it. Make sure that all components of the CORDER Operating microscope, including the base unit, light source and camera, are present and in good condition.
Stage 2: Assemble the entire machine
The CORDER operating microscope has different components that need to be assembled into a complete system. The first step in assembling a CORDER operating microscope is to assemble the surgical microscope base and column, then assemble the transverse arm and cantilever, and then assemble the surgical microscope head onto the suspension. This completes the assembly of our CORDER operating microscope.
Section 3: Connecting cables
Once the base unit is assembled, the next step is to connect the cables. CORDER Operating microscopes come with different cables that need to be connected to the base unit. Then connect the light source cable to the light port.
Paragraph 4: Initiation
After connecting the cable, insert the power supply and turn on the CORDER operating microscope. Check the light source system of the microscope head to ensure that the light source is working properly. Adjust the brightness control knob on the light source to obtain the desired amount of light.
Paragraph 5: Test
To verify that the CORDER Operating microscope is working properly, test it by examining the object at different magnifications. Make sure the image is clear and sharp. If you find any problems, please consult the user manual or contact customer support for assistance.
In conclusion, the CORDER Operating microscope is a must-have tool for surgeons who require careful mounting. By following the steps above, you can ensure the normal operation of the CORDER Operating microscope.
Post time: Jun-02-2023