How to use a surgical microscope

Surgical microscope is a medical device used for high-precision microsurgery. The following is the usage method of surgical microscope:

1. Placement of surgical microscope: Place the surgical microscope on the operating table and ensure it is in a stable position. According to surgical requirements, adjust the height and angle of the microscope to ensure that the operator can use it comfortably.

2. Adjusting the microscope lens: By rotating the lens, adjust the magnification of the microscope. Usually, surgical microscopes can be continuously zoomed in, and the operator can change the magnification by rotating the adjustment ring.

3. Adjusting the lighting system: Surgical microscopes are usually equipped with a lighting system to ensure that the operating area receives sufficient light. The operator can achieve the best lighting effect by adjusting the brightness and angle of the lighting system.

4. Use accessories: According to surgical needs, the surgical microscope can be equipped with various accessories, such as cameras, filters, etc. Operators can install and adjust these accessories as needed.

5. Start surgery: After adjusting the surgical microscope, the operator can start the surgical operation. The surgical microscope provides a high magnification and clear field of view to assist the operator in performing precise surgery.

6. Adjusting the microscope: During the surgical process, it may be necessary to adjust the height, angle, and focal length of the microscope as needed to obtain better field of view and operating conditions. The operator can make adjustments by operating the knobs and adjustment rings on the microscope.

7. End of surgery: After the surgery is completed, turn off the lighting system and remove the surgical microscope from the operating table to clean and disinfect it for future use.

Please note that the specific usage of surgical microscopes may vary depending on the equipment model and surgical type. Before using a surgical microscope, the operator should be familiar with the instructions for using the equipment and follow the instructions for operation.